Classification of eligible cars.
Modern Class
Formula 1		 AnimF1mod.gif (169169 bytes)
Car set up rules:
Cars are raced as box standard. However, the following alterations are permissible.
If a proposed alteration is not mentioned below then the driver should request a ruling from a Scrutineer or Committee member. Scrutineers and Committee members must be in agreement for a proposed amendment to be passed.

Motors, Wheels, Axle Bearings may be glued in.
Only the standard motor as fitted new may be used.
Rear tyres diameter must not be less than 20mm.
Maximum front axle width (outside edge of wheel hub/tyre) is 68mm.
Maximum rear axle width (outside edge of wheel hub/tyre) is 70mm.
Body shells may be painted, but not underpans.
All four wheels must touch the track.
Body screws may be loosened.
Braid and guide blades may be interchanged across manufacturers.
   
   
Any cars issued during the last 5 years not specified in any of the above makes may also be eligible but will be subject to approval from Race Control.