|
External Fixing Instructions:
1: Decals are best applied to a glossy surface. Apply paint first. Make sure surface is clean and free from oil, dust, etc. 2: Trim the individual decal as close as possible. Curved nail cutting scissors are the best for this. 3: Using tweezers, dip the decal into plain water for 5 seconds. 4: Lay the decal on the damp work surface for 30 seconds. 5: Slide the decal off the backing paper into position on the model. 6: Gently blot the excess water with a damp tissue, then a dry tissue. 7: If you are using a decal setting solution, apply it now. Water it down a little to reduce its strength. 8: Allow to dry overnight. 9: Apply a coat of clear finish over the decal to protect it. This must be a water based acrylic finish.
|