SCRATCH-BiLDA Chassis

An adjustable wheelbase resin chassis ideally suited for 1/32nd scale mid-engined sports car bodies made from resin, fibre glass, vacuum and injection moulded formed plastic, etc'. Designed to maximise detailing opportunities inside the car's body and offer a low C of G and high levels of traction with its ultra low sidewinder motor mount. Car bodies can be fitted to outriggers, pin tubes and even with their original post mounts with this chassis.

Main construction
Impact resistant vacuum moulded polyurethane resin.This material can be easily drilled and will take self tapping screws and normally threaded bolts directly. It can also be easily sanded and reshaped or have material added to it. Includes integral housing and mouldings for adjustable 9 mm dia. disc magnet and wiring loom.

SCRATCH-BILDA Chassis - Basic kit

Picture shows kit in unassembled form. Shown above are the 'outrigger' and 'pin-tube' configurations of the assembled chassis.

Ancillaries included with basic kit as shown:
100 mm brass "pin tube" Stainless steel "outrigger" blank
70 mm brass wheel base "extender" rod
ABS front axle mount "capping"
1.5 mm Styrene sheet body "fill in" material
9 mm x 2 .5 mm Neodymium magnet
6 8 mm M4 size magnet "holder" bolts
6 x self tapping "pan head" screws
Resin rear track "packer"
10 x brass axle spacers.

SCRATCH-BiLDA Vital dimensions
30 mm minimum rear track (ex' wheel widths)
31 mm minimum front track (ex' wheel widths)
71.5 mm minimum wheelbase, "infinite" extendibility
20.5 mm guide max. projection from centre front axle line
22 mm seat bulkhead from centre rear axle line
Ideal tyre dia. front 19 mm / rear 21 mm (or 2 mm larger rear than front)
2.5 mm ground clearance, using above tyre sizes
11.5 mm motor shaft centre to rear axle centre
Nominal weight 19 grams - with pin tubes installed

SCRATCH-BiLDA Compatible Running Gear

MAXi-MODELS

All listed Accessories and DETAIL-PACKS (MXA 000)

Scalextric/Superslot

Sidewinder gears/Wheels/Tyres/Axles/Bearings/"Blue"guide/Motors

Fly/GB Track

Sidewinder gears/Wheels/Tyres/Axles/Bearings/Short post guide

Pro Slot

Sidewinder gears/Wheels/Tyres/Axles/Bearings/Short post guide/Motors

Other Makes

Any Mabuchi "S" can type motor with "can" end drive. Other components that conform generally in size to the above suggested makes.

MXC 007B
Weight: 35.00 gms

SCRATCH-BILDA Chassis - Rolling Kit

Picture shows assembled chassis with outriggers and stated extras installed. Chassis is supplied unassembled.

Additional items - Wheel/Tyre/Axle/Bearing set + grub screw and wrench. Min track 57 mm rear / 53 mm front with wheels supplied.

MXC 007R
Weight: 60.00 gms

SCRATCH-BILDA Chassis - Fully Equipped Kit

Picture shows assembled chassis with pin-tubes and stated extras installed. Chassis is supplied unassembled.

Additional items - Wheel/Tyre/Axle/Bearing set + grub screws and wrench, 28,000 rpm "Hot Rod Pro" motor with silicon shielded wires, guide with braid and motor wire attachment eyelets, pinion and spur gears.

MXC 007F
Weight: 85.00 gms